The Machines We Build

Block and paver machines

Other machines and equipment

SG = Sehim Gümüş · number = 20 cm blocks per press cycle · D = double hopper · S = single hopper · R = with robot · FA = fully automatic

For block machines, "10-block" means 10 standard 20 cm blocks per press cycle. With a mould change, every model also makes 10 and 15 cm blocks, pumice blocks, interlocking pavers, kerbstones and hollow floor blocks. Apart from the SG-12 FA, controls can be manual or semi-automatic, as you prefer. Technical data is coming soon; until then, just ask us on WhatsApp.

Output varies widely with the materials, climate, cement content and quality, and sand quality. That is why we do a capacity analysis for each project instead of quoting a fixed figure.

MODEL FINDER

Select the Right Machine Model for Your Needs

Specify block capacity, hopper type and automation level to match the right machine model and visit its dedicated page.

1 Capacity (How many standard 20 cm blocks per cycle?)

4-Block

Makes 4 standard 20 cm blocks per cycle.

8-Block

Makes 8 standard 20 cm blocks per cycle.

10-Block

Makes 10 standard 20 cm blocks per cycle.

12-Block

Makes 12 standard 20 cm blocks per cycle.

2 Hopper Type (Mortar Storage)

Single Hopper (S)

Single hopper. Produces blocks, hollow blocks, plain pavers and kerbstones. Does not produce two-layer coloured pavers.

Double Hopper (D)

Double hopper. Base and surface mortar are fed separately; produces coloured surface interlocking pavers and kerbstones.

3 Automation & Stacking System

Standard

Finished products are transported manually with site trolleys. Economical initial investment.

With Robot (R)

Stacking robot lifts fresh products to stacks; eliminates manual wheelbarrows.

Fully Automatic (FA)

Fully automated line; stacking robot stacks products automatically.

Mould Versatility: Every machine can run custom moulds for 10, 15 or 20 cm blocks, hollow floor blocks, pumice blocks, pavers or kerbstones. Moulds are custom manufactured at our Antakya plant.

Matching Model

SG-10 DR

10-Block Double-Hopper Block Machine with Robot

Makes 10 standard 20 cm blocks per press cycle. It has a double hopper, and a robot takes the finished blocks.

View Machine Page Ask on WhatsApp

10-Block Semi-Automatic Block & Paver Machine with Robot

Block & Paver Machines

Concrete Block & Interlocking Paver Machines

Semi-automatic and fully automatic machines for blocks, pumice blocks and interlocking pavers; 10, 8 or 4-block, single or double hopper, built to order.

Mobile Egg-Laying Block Machine (no pallets)

Mobile Block Makers

Mobile (Egg-Laying) Block Machines

Pallet-free, egg-laying, self-propelled mobile block machines that drop finished blocks directly on the ground without building a fixed plant.

GMS Integrated Block & Paver Manufacturing Plant

Complete Plant Solutions

Complete Block & Paver Plant Solutions

Full production line design covering the mixer, block machine, pallet handling system and curing area layout, built around 10, 8 and 4-block machines.

Concrete Mixers

Concrete Mixers (U-Type & Pan)

Twin-shaft U-type mixers and heavy-duty pan mixers for semi-dry block concrete mixes, starting from 1 m³ capacity.

Crushing & Screening

Crushing & Screening Plants

Primary jaw crushing plants and multi-deck vibrating screening systems, engineered together with block/rubble recycling mills.

Concrete Pipe Systems

Concrete Pipe & Culvert Machines

Vertical machines for gasketed concrete pipes and culverts, built for sewer and stormwater infrastructure projects.

Gallery

PLANT PLANNING GUIDE

What Else Is Needed To Set Up a Plant?

To start producing with a block or paver machine you also need some supporting equipment. A working plant usually needs the following:

Site Transport Trolleys

Block Transfer Cart: Carries freshly made blocks and pavers on their pallet to the curing area without disturbing them. How many you need depends on your daily output.
Sand and Mortar Cart: A steel site cart with bearing wheels for bringing sand, gravel and cement to the mixer.

Mortar Mixing & Feeding

Concrete Mixer: Pan Mixer or Twin-Shaft U-Type Mixer (500 kg - 1000 L) for homogenous mixing of semi-dry block and paver mortar.
Mortar Conveyor Belt: Inclined rubber conveyor belt (8 m or 10 m) to feed fresh mortar continuously from mixer into the machine hopper.
Aggregate Hopper (Optional): 3-compartment ground storage hopper to meter sand and crushed stone to the conveyor.

Production Pallets (Boards)

Composite Production Pallets: Steel-framed composite pallets that keep their shape under the machine's pressing and vibration.
How Many: Pallets stay in the yard while the products cure, so you need far more pallets than the machine uses in one cycle. We work out the number with you based on your capacity.
Moisture-Resistant: Not affected by water or damp and does not rot, so it lasts a long time.

Moulds & Automation

Extra Moulds: Besides the block mould you can add moulds for interlocking pavers, kerbstones, hollow floor blocks or 10/15 cm blocks. We make the moulds in our own workshop.
Stacking Robot: Takes the finished blocks off the machine and carries them to the stacking area; fitted on the robot models.
Air Compressor: Site compressor to power pneumatic locks, vibrator clamps and hopper discharge gates.

Turnkey Plant Package: Along with the machine you can get all the plant equipment, from transfer carts and mixers to conveyors and silos, under a single contract. We decide together what your project needs.

Ask for Plant List & Price

REAL FOOTAGE FROM THE FIELD

Our Machines Working On Site

Original videos of our machines running at customer plants. Click a video to watch it without leaving the page.

All Videos (17)

Request Custom Capacity Analysis & Official Proforma

We prepare the most competitive factory price and FOB Port of Iskenderun shipping quote for your project.

WhatsApp Sales Hotline Request a Quote

Industrial Concrete Block, Paver & Plant Machinery